Design and implementation of an automatically aligned solar tracking system
This paper presents the design and implementation of a closed-loop solar tracker system. The demand for clean energy sources has increased along with the rising demand for electrical energy and the increasing amount of environment pollution triggered by fuel consumption. Among these sources, solar e...
সংরক্ষণ করুন:
| প্রধান লেখক: | , |
|---|---|
| অন্যান্য লেখক: | |
| বিন্যাস: | EJournal Article |
| প্রকাশিত: |
Institute of Advanced Engineering and Science,
2019-12-01.
|
| বিষয়গুলি: | |
| অনলাইন ব্যবহার করুন: | Get Fulltext |
| ট্যাগগুলো: |
ট্যাগ যুক্ত করুন
কোনো ট্যাগ নেই, প্রথমজন হিসাবে ট্যাগ করুন!
|
| LEADER | 02342 am a22002773u 4500 | ||
|---|---|---|---|
| 001 | IJPEDS_18952_12937 | ||
| 042 | |a dc | ||
| 100 | 1 | 0 | |a Abu Sneineh, Anees |e author |
| 100 | 1 | 0 | |a Palestine Technical University - Kadoorie |e contributor |
| 700 | 1 | 0 | |a Salah, Wael A. |e author |
| 245 | 0 | 0 | |a Design and implementation of an automatically aligned solar tracking system |
| 260 | |b Institute of Advanced Engineering and Science, |c 2019-12-01. | ||
| 500 | |a https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18952 | ||
| 520 | |a This paper presents the design and implementation of a closed-loop solar tracker system. The demand for clean energy sources has increased along with the rising demand for electrical energy and the increasing amount of environment pollution triggered by fuel consumption. Among these sources, solar energy is considered the most feasible given its wide availability and easy operation in different environments. The main purpose of this study is to maximize the generated photovoltaic power and reduce CO2 emissions by designing an efficient and low-cost solar tracking system. An aligned closed-loop solar tracker is designed and constructed to achieve the best accuracy. The proposed system shows more freedom in its movement to overcome the problems associated with the tilt of the frame-holder. A PIC microcontroller based on the Flowcode programming language is used, the position feedback is detected by using a photo-sensor, and the H-Bridge driver is used to control two DC motors. According to the experimental results, the proposed system shows significant improvements in efficiency compared with stationary solar tracking systems. | ||
| 540 | |a Copyright (c) 2019 Institute of Advanced Engineering and Science | ||
| 540 | |a http://creativecommons.org/licenses/by-sa/4.0 | ||
| 546 | |a eng | ||
| 655 | 7 | |a info:eu-repo/semantics/article |2 local | |
| 655 | 7 | |a info:eu-repo/semantics/publishedVersion |2 local | |
| 655 | 7 | |2 local | |
| 786 | 0 | |n International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 4: December 2019; 2055-2064 | |
| 786 | 0 | |n 2722-256X | |
| 786 | 0 | |n 2088-8694 | |
| 786 | 0 | |n 10.11591/ijpeds.v10.i4 | |
| 787 | 0 | |n https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18952/12937 | |
| 856 | 4 | 1 | |u https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/18952/12937 |z Get Fulltext |