Special Issue of the Manufacturing Engineering Society (MES)
This book derives from the Special Issue of the Manufacturing Engineering Society (MES) that was launched as a Special Issue of the journal Materials. The 48 contributions, published in this book, explore the evolution of traditional manufacturing models toward the new requirements of the Manufactur...
Saved in:
| Other Authors: | , |
|---|---|
| Format: | Book Chapter |
| Published: |
Basel, Switzerland
MDPI - Multidisciplinary Digital Publishing Institute
2020
|
| Subjects: | |
| Online Access: | Get Fullteks DOAB: description of the publication |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| LEADER | 10572naaaa2203373uu 4500 | ||
|---|---|---|---|
| 001 | doab_20_500_12854_69004 | ||
| 005 | 20210501 | ||
| 020 | |a books978-3-03936-743-6 | ||
| 020 | |a 9783039367429 | ||
| 020 | |a 9783039367436 | ||
| 024 | 7 | |a 10.3390/books978-3-03936-743-6 |c doi | |
| 041 | 0 | |a English | |
| 042 | |a dc | ||
| 072 | 7 | |a TBX |2 bicssc | |
| 100 | 1 | |a Rubio, Eva M. |4 edt | |
| 700 | 1 | |a Camacho, Ana M. |4 edt | |
| 700 | 1 | |a Rubio, Eva M. |4 oth | |
| 700 | 1 | |a Camacho, Ana M. |4 oth | |
| 245 | 1 | 0 | |a Special Issue of the Manufacturing Engineering Society (MES) |
| 260 | |a Basel, Switzerland |b MDPI - Multidisciplinary Digital Publishing Institute |c 2020 | ||
| 300 | |a 1 electronic resource (416 p.) | ||
| 506 | 0 | |a Open Access |2 star |f Unrestricted online access | |
| 520 | |a This book derives from the Special Issue of the Manufacturing Engineering Society (MES) that was launched as a Special Issue of the journal Materials. The 48 contributions, published in this book, explore the evolution of traditional manufacturing models toward the new requirements of the Manufacturing Industry 4.0 and present cutting-edge advances in the field of Manufacturing Engineering focusing on additive manufacturing and 3D printing, advances and innovations in manufacturing processes, sustainable and green manufacturing, manufacturing systems (machines, equipment and tooling), metrology and quality in manufacturing, Industry 4.0, product lifecycle management (PLM) technologies, and production planning and risks. | ||
| 540 | |a Creative Commons |f https://creativecommons.org/licenses/by/4.0/ |2 cc |4 https://creativecommons.org/licenses/by/4.0/ | ||
| 546 | |a English | ||
| 650 | 7 | |a History of engineering & technology |2 bicssc | |
| 653 | |a ultrasonic metal welding | ||
| 653 | |a finite element analysis | ||
| 653 | |a temperature distribution | ||
| 653 | |a strength of the joint in tension | ||
| 653 | |a heat flux | ||
| 653 | |a friction | ||
| 653 | |a plastic deformation | ||
| 653 | |a thermocouple | ||
| 653 | |a WEDM | ||
| 653 | |a deep learning | ||
| 653 | |a deep neural networks | ||
| 653 | |a Industry 4.0 | ||
| 653 | |a crash boxes | ||
| 653 | |a joining by forming | ||
| 653 | |a resistance spot-welding | ||
| 653 | |a crashworthiness | ||
| 653 | |a UNS A92024 | ||
| 653 | |a WC-Co | ||
| 653 | |a wear mechanism | ||
| 653 | |a tribology | ||
| 653 | |a adhesion | ||
| 653 | |a laser | ||
| 653 | |a additive manufacturing | ||
| 653 | |a laser beam machining | ||
| 653 | |a laser polishing | ||
| 653 | |a waviness | ||
| 653 | |a roughness | ||
| 653 | |a Inconel 718 | ||
| 653 | |a Ti6Al4V alloy | ||
| 653 | |a chip geometry | ||
| 653 | |a dry machining | ||
| 653 | |a parametric models | ||
| 653 | |a turning | ||
| 653 | |a UNS A92024-T3 | ||
| 653 | |a corrosion | ||
| 653 | |a surface integrity | ||
| 653 | |a Ra | ||
| 653 | |a residual stress | ||
| 653 | |a functional performance | ||
| 653 | |a ultimate tensile strength | ||
| 653 | |a wear | ||
| 653 | |a drilling | ||
| 653 | |a machining | ||
| 653 | |a dry drilling | ||
| 653 | |a stack | ||
| 653 | |a FML | ||
| 653 | |a CFRP | ||
| 653 | |a UNS A97075 | ||
| 653 | |a stepped shaft | ||
| 653 | |a cross wedge rolling | ||
| 653 | |a plastic flow kinetic theories | ||
| 653 | |a variable cone angle billets | ||
| 653 | |a near-net forming | ||
| 653 | |a gear manufacturing | ||
| 653 | |a roughness model | ||
| 653 | |a multitasking machines/multiprocess machines | ||
| 653 | |a NEXAFS | ||
| 653 | |a soft X-rays SXR | ||
| 653 | |a SXR absorption spectroscopy | ||
| 653 | |a respiratory movement | ||
| 653 | |a lung tumor | ||
| 653 | |a radiotherapy | ||
| 653 | |a arduino | ||
| 653 | |a cancer treatment | ||
| 653 | |a linear accelerator | ||
| 653 | |a ultrasonic molding | ||
| 653 | |a microchannel | ||
| 653 | |a thin-wall plate | ||
| 653 | |a replicability | ||
| 653 | |a polystyrene | ||
| 653 | |a medical devices | ||
| 653 | |a FDM | ||
| 653 | |a PLA | ||
| 653 | |a material color | ||
| 653 | |a pigmentation | ||
| 653 | |a extrusion temperature | ||
| 653 | |a humidity | ||
| 653 | |a micro-manufacturing | ||
| 653 | |a manufacturing systems | ||
| 653 | |a production planning | ||
| 653 | |a polylactide (PLA) | ||
| 653 | |a acrylonitrile butadiene styrene (ABS) | ||
| 653 | |a tensile behaviour | ||
| 653 | |a layer height | ||
| 653 | |a infill density | ||
| 653 | |a layer orientation | ||
| 653 | |a cybernetics | ||
| 653 | |a system dynamics | ||
| 653 | |a production management | ||
| 653 | |a maintenance management | ||
| 653 | |a Viable System Model | ||
| 653 | |a automotive industry | ||
| 653 | |a hybrid components stack | ||
| 653 | |a titanium | ||
| 653 | |a magnesium | ||
| 653 | |a repair and maintenance operations | ||
| 653 | |a roughness average (Ra) | ||
| 653 | |a ANOVA | ||
| 653 | |a in-process measurement | ||
| 653 | |a geometric accuracy | ||
| 653 | |a grinding process | ||
| 653 | |a tapered roller bearings | ||
| 653 | |a single | ||
| 653 | |a point | ||
| 653 | |a incremental | ||
| 653 | |a forming | ||
| 653 | |a thermoplastics | ||
| 653 | |a biocompatible | ||
| 653 | |a temperature | ||
| 653 | |a process | ||
| 653 | |a parameters | ||
| 653 | |a 3D printing | ||
| 653 | |a correlation coefficients | ||
| 653 | |a fused deposition modeling | ||
| 653 | |a non-parametric tests | ||
| 653 | |a surface roughness | ||
| 653 | |a LMD | ||
| 653 | |a laser metal deposition | ||
| 653 | |a shielding gas | ||
| 653 | |a argon | ||
| 653 | |a helium | ||
| 653 | |a melt pool temperature | ||
| 653 | |a synthetic polymer | ||
| 653 | |a bioprinting | ||
| 653 | |a multi-material microextrusion | ||
| 653 | |a bioink | ||
| 653 | |a Selective Laser Melting | ||
| 653 | |a thermo fluidic | ||
| 653 | |a phase change | ||
| 653 | |a consolidation | ||
| 653 | |a Arbitrary Lagrangean-Eulerian Method | ||
| 653 | |a metallic powder | ||
| 653 | |a basalt fiber reinforced plastic (BFRP) | ||
| 653 | |a delamination | ||
| 653 | |a edge trimming | ||
| 653 | |a tool wear | ||
| 653 | |a scaffold | ||
| 653 | |a PCL | ||
| 653 | |a RepRap | ||
| 653 | |a fused filament fabrication | ||
| 653 | |a three-dimensional | ||
| 653 | |a cell culture | ||
| 653 | |a design | ||
| 653 | |a topological optimization | ||
| 653 | |a cost | ||
| 653 | |a stock | ||
| 653 | |a spare parts | ||
| 653 | |a free-form filament fabrication (FFF) | ||
| 653 | |a robot-assisted polishing | ||
| 653 | |a force signal | ||
| 653 | |a end point detection | ||
| 653 | |a WAAM | ||
| 653 | |a GMAW | ||
| 653 | |a cold metal transfer | ||
| 653 | |a hardness | ||
| 653 | |a mechanical properties | ||
| 653 | |a thermal input | ||
| 653 | |a microstructure | ||
| 653 | |a Synchrotron X-rays | ||
| 653 | |a lithography | ||
| 653 | |a curved substrate | ||
| 653 | |a microstructures | ||
| 653 | |a computed tomography | ||
| 653 | |a surface extraction | ||
| 653 | |a Canny algorithm | ||
| 653 | |a Deriche algorithm | ||
| 653 | |a carbon fiber reinforced polymer | ||
| 653 | |a hole quality characteristics | ||
| 653 | |a geometrical parameters | ||
| 653 | |a roughness parameters | ||
| 653 | |a taper | ||
| 653 | |a heat affected zone | ||
| 653 | |a product lifecycle management (PLM) | ||
| 653 | |a manufacturing problem solving (MPS) | ||
| 653 | |a fault diagnosis | ||
| 653 | |a smart factory | ||
| 653 | |a process failure mode and effect analysis (PFMEA) | ||
| 653 | |a case-based reasoning (CBR) | ||
| 653 | |a hole making | ||
| 653 | |a surface texture | ||
| 653 | |a contact measurement | ||
| 653 | |a optical measurement | ||
| 653 | |a delphi prospection | ||
| 653 | |a education | ||
| 653 | |a employment | ||
| 653 | |a feature-based modeling | ||
| 653 | |a inspection planning | ||
| 653 | |a dimensional and geometrical specification | ||
| 653 | |a process specification | ||
| 653 | |a collaborative and integrated product-process development | ||
| 653 | |a modeling | ||
| 653 | |a laser processing | ||
| 653 | |a simulation | ||
| 653 | |a pyrometer | ||
| 653 | |a aluminum | ||
| 653 | |a brain | ||
| 653 | |a rapid prototyping | ||
| 653 | |a atlas | ||
| 653 | |a rat | ||
| 653 | |a magnetic resonance imaging | ||
| 653 | |a educative model | ||
| 653 | |a scaffolds | ||
| 653 | |a porosity | ||
| 653 | |a pore size | ||
| 653 | |a multiobjective optimization | ||
| 653 | |a priority dispatching rules | ||
| 653 | |a simulation optimization | ||
| 653 | |a job shop scheduling | ||
| 653 | |a flexible manufacturing systems | ||
| 653 | |a service-oriented manufacturing systems | ||
| 653 | |a maintenance | ||
| 653 | |a aircrat engine repair and overhaul (MRO) | ||
| 653 | |a incremental forming | ||
| 653 | |a FEM | ||
| 653 | |a force prediction | ||
| 653 | |a numerical model | ||
| 653 | |a semi-analytical model | ||
| 653 | |a specific energy | ||
| 653 | |a welding distortion | ||
| 653 | |a LSND (low stress no distortion) | ||
| 653 | |a htTTT | ||
| 653 | |a model validation | ||
| 653 | |a Compression-After-Impact testing | ||
| 653 | |a Compression-After-Impact strength | ||
| 653 | |a carbon fiber reinforced plastics | ||
| 653 | |a flat specimen | ||
| 653 | |a AA7075 | ||
| 653 | |a risk assessment | ||
| 653 | |a dangerous substance | ||
| 653 | |a Directive 89/391/EEC | ||
| 653 | |a Directive 2012/18/EU | ||
| 653 | |a ISO 45001:2018 standard | ||
| 653 | |a emerging risk | ||
| 653 | |a major accident | ||
| 653 | |a manufacturing | ||
| 653 | |a occupational accident | ||
| 653 | |a risk management | ||
| 653 | |a manufacturing industry | ||
| 653 | |a bow-tie analysis | ||
| 653 | |a pallet mover accidents | ||
| 653 | |a accident analysis | ||
| 653 | |a safety barriers | ||
| 653 | |a sheet metal forming | ||
| 653 | |a flanging | ||
| 653 | |a hole-flanging | ||
| 653 | |a incremental sheet forming | ||
| 653 | |a Single Point Incremental Forming (SPIF) | ||
| 653 | |a thickness distribution | ||
| 653 | |a additive manufacturing and 3D printing | ||
| 653 | |a advances and innovations in manufacturing processes | ||
| 653 | |a sustainable and green manufacturing | ||
| 653 | |a manufacturing systems: machines | ||
| 653 | |a equipment and tooling | ||
| 653 | |a metrology and quality in manufacturing | ||
| 653 | |a product lifecycle management (PLM) technologies | ||
| 653 | |a risks | ||
| 856 | 4 | 0 | |a www.oapen.org |u https://mdpi.com/books/pdfview/book/2772 |7 0 |z Get Fullteks |
| 856 | 4 | 0 | |a www.oapen.org |u https://directory.doabooks.org/handle/20.500.12854/69004 |7 0 |z DOAB: description of the publication |