Design, Simulation, and Analysis of the Extrusion Process of a PVC Thermoplastic Profile to Optimize the Design of the Die and the Machine Parameters
The objective of this work is to verify the design of an existing die for the manufacture of an extruded profile using the simulation of the flow in the head using a simulation software that uses computational fluid dynamics and also the experimental design and construction of a calibrator by means...
Saved in:
Main Author: | |
---|---|
Format: | Ebooks |
Published: |
IntechOpen,
2022-03-19.
|
Subjects: | |
Online Access: | Get Online |
Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
LEADER | 02273 am a22001933u 4500 | ||
---|---|---|---|
001 | intechopen_books_10942 | ||
042 | |a dc | ||
100 | 1 | 0 | |a Tomassini, Carlos José Salvador |e author |
245 | 0 | 0 | |a Design, Simulation, and Analysis of the Extrusion Process of a PVC Thermoplastic Profile to Optimize the Design of the Die and the Machine Parameters |
260 | |b IntechOpen, |c 2022-03-19. | ||
500 | |a https://mts.intechopen.com/articles/show/title/design-simulation-and-analysis-of-the-extrusion-process-of-a-pvc-thermoplastic-profile-to-optimize-t | ||
520 | |a The objective of this work is to verify the design of an existing die for the manufacture of an extruded profile using the simulation of the flow in the head using a simulation software that uses computational fluid dynamics and also the experimental design and construction of a calibrator by means of the extrusion the geometry and desired dimensions of the profile. The rheological behavior of rigid PVC in the extruded molten state was investigated, which in itself is a difficult target due to the intrinsic weakness of this polymer that degrades when heated above 140°C. By means of a special capillary rheometer, rheological data, k and n of the power law, were obtained to introduce them, together with the process input parameters and the flow channel geometry in the simulation software. The flow channel was drawn with the head and calibrator using CAD-3D software. The different parts of the calibrator were manufactured and assembled into the equipment. The extrusion was performed with the process parameters: screw speed and material temperature used in the simulation software. The results obtained by the extrusion, geometry and final dimensions of the profile, mass flow, pressure, and temperature in the head were compared with those delivered by the software, being the same satisfactory. | ||
540 | |a https://creativecommons.org/licenses/by/3.0/ | ||
546 | |a en | ||
690 | |a Fiber-Reinforced Plastics | ||
655 | 7 | |a Chapter, Part Of Book |2 local | |
786 | 0 | |n https://www.intechopen.com/books/10942 | |
787 | 0 | |n ISBN:978-1-80355-075-6 | |
856 | \ | \ | |u https://mts.intechopen.com/articles/show/title/design-simulation-and-analysis-of-the-extrusion-process-of-a-pvc-thermoplastic-profile-to-optimize-t |z Get Online |