Erratum - Hysteresis Behavior of Pre-Strained Shape Memory Alloy Wires Subject to Cyclic Loadings: An Experimental Investigation
Shape memory alloys (SMAs) are a class of smart materials with the ability to recover their initial shape after releasing the applied load and experiencing a relatively large amount of strain. However, sequential loading and unloading which is an unavoidable issue in many applications significantly...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Ebooks |
| Published: |
IntechOpen,
2020-01-15.
|
| Subjects: | |
| Online Access: | Get Online |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| LEADER | 01915 am a22002173u 4500 | ||
|---|---|---|---|
| 001 | intechopen_books_8879 | ||
| 042 | |a dc | ||
| 100 | 1 | 0 | |a Zareie, Shahin |e author |
| 700 | 1 | 0 | |a Zabihollah, Abolghassem |e author |
| 700 | 1 | 0 | |a Alam, M. Shahria |e author |
| 245 | 0 | 0 | |a Erratum - Hysteresis Behavior of Pre-Strained Shape Memory Alloy Wires Subject to Cyclic Loadings: An Experimental Investigation |
| 260 | |b IntechOpen, |c 2020-01-15. | ||
| 500 | |a https://mts.intechopen.com/articles/show/title/erratum-hysteresis-behavior-of-pre-strained-shape-memory-alloy-wires-subject-to-cyclic-loadings-an-e | ||
| 520 | |a Shape memory alloys (SMAs) are a class of smart materials with the ability to recover their initial shape after releasing the applied load and experiencing a relatively large amount of strain. However, sequential loading and unloading which is an unavoidable issue in many applications significantly reduces the strain recovery of SMA wires. In the present work, experimental tests have been performed to study the pre-strain effect of SMA wires on hysteresis behavior of SMA under cyclic loadings. The effects of cyclic loading on austenite and martensite properties have been investigated. SMA wires with diameter of 1.5 mm and length of 560 mm subjected to about 1000 cycles show about 3 mm residual deformation, which is approximately equal to 0.5% residual strain. It is observed that applying 1.7% pre-strain on the SMA wire fully eliminates the residual strain due to cyclic loading. | ||
| 540 | |a https://creativecommons.org/licenses/by-nc/4.0/ | ||
| 546 | |a en | ||
| 690 | |a Emerging Trends in Mechatronics | ||
| 655 | 7 | |a Chapter, Part Of Book |2 local | |
| 786 | 0 | |n https://www.intechopen.com/books/8879 | |
| 787 | 0 | |n ISBN:978-1-78984-319-4 | |
| 856 | \ | \ | |u https://mts.intechopen.com/articles/show/title/erratum-hysteresis-behavior-of-pre-strained-shape-memory-alloy-wires-subject-to-cyclic-loadings-an-e |z Get Online |